BrandTech Scientific PLT unit Pipette Leak Testing Unit - Manual (Page 65)

E
ng
lis
h
We shall not be liable for the consequences of improper handling, use, servic-
ing, operation or unauthorized repairs of the instrument or the consequences
of normal wear and tear especially of wearing parts such as pistons, seals,
valves and the breakage of glass as well as the failure to follow the instruc-
tions of the operating manual. We are not liable for damage resulting from
any actions not described in the operating manual or if non-original parts have
been used.
a) Clean and decontaminate the instrument carefully.
b) Complete the 'Declaration on Absence of Health Hazards' (ask your
supplier or manufacturer for the form. The form can also be downloaded
from www.brand.de).
c) Send the completed form along with the instrument to the manufacturer or
to the dealer with an exact description of the type of malfunction and the
media used.
The return transport of the instrument is at risk and cost of the sender.
Warranty
If a problem cannot be fixed by following the troubleshooting guide, or by
replacing spare parts, then the instrument must be sent in for repair.
For safety reasons, instruments returned for checks and repairs must
be clean and decontaminated!
Return for Repair
Repairs and Warranty
65