BrandTech Scientific PLT unit Pipette Leak Testing Unit - Manual (Page 47)

E
ng
lis
h
Testing single-channel pipettes
The 'Main Menu' is called
up by pressing or turning the
select knob.
Set to 'Pipette Type' by
turning the select knob.
Press the 'Execute' button.
The 'Channels' submenu is
called up.
1.
Calling up the
Main Menu
2.
Selecting the
pipette type
3.
Confirming the
pipette type
Set to 'Single-Channel' by
turning the select knob.
Press the 'Execute' button.
The 'Nominal Volume'
submenu is called up.
4.
Selecting the
single-channel
pipette
5.
Confirming the
single-channel
pipette
Main Menu
Pipette Type
Self Test
Switch OFF
Settings.. .
select back
Main Menu
Pipette Type
Self Test
Switch OFF
Settings.. .
select back
Channels
Single Channel
Multichannel
select back
Example: 100 μl Air-displacement pipette, dynamic test
Before testing, mount a new, unused, disposable tip, and insert the pipette with the tip in the previously
selected and attached Adapter 1 (see page 46).
Channels
Single Channel
Multichannel
select back
Nominal Volume
25 µl
50 µl
100 µl
200 µl
select back
'100 μl' is selected by turn-
ing the select knob.
6.
Selecting the
pipette volume
Nominal Volume
25 µl
50 µl
100 µl
200 µl
select back
Continued on next page
What to do? How to do it Keys to press Display readout
47