Setup software – NOVUS AirGate-Modbus User Manual
Page 9
AirGate-Modbus
NOVUS AUTOMATION
9/22
SETUP SOFTWARE
The DigiConfig application is a Windows® program used for the configuration of the AirGate-Modbus. For its
installation, execute the file “DigiConfigSetup.exe” from the CD. When installing the setup software, the USB Serial Port
driver of AirGate-Modbus may be automatically installed according to Fig. 10.
Fig. 8 - Selection of components
DigiConfig has a complete help file, with all necessary information for its full usage. To consult the help, start the
application and select the “Help” menu or press the “F1” key.
In case you don't have the CD which accompanies the AirGate-Modbus, consult the
website to get DigiConfig installer and the additional manuals.
To configure a AirGate-Modbus you must execute the Digiconfig and in the main screen access
“configurations/communication” and edit the configurations, according to Fig. 11:
Fig. 9 - Communication of DigiConfig
• Serial Port = USB Serial Port (COM X)
• Baud rate = 115200
• Parity = None
• Stop Bits = 2 bits
• Timeout (msec) = 1000