Pulsafeeder PulsaPro 900 EN - Manual (Page 46)

42
8. Replacement Parts
8.1 PulsaPro Series KOPkit Program
PulsaPro
Series KOPkits contain all replacement parts normally used in a preventative
maintenance program.
PULSAlube Universal or Ultra is available for preventative maintenance programs.
Refer to the Equipment Startup section.
There is a specific KOPkit for every
PulsaPro
Series pump model. When practical, each
KOPkit is vacuum-packed for extended storage.
All
PulsaPro
Series pumps will have the KOPkit number identified on:
a) the pump nameplate,
b) the specification data sheet, and
c) the Pulsafeeder order documents.
KOPkits can also be selected from the technical data sheet shipped with the pump or by a
Pulsafeeder representative.
8.2 Ordering KOPkits or Parts
When ordering replacement parts always specify:
a) Pump model and serial number (stamped on pump nameplate), e.g., Model No.
PRO9000000X with Serial No. X775123.
b) Part number and description from the
PulsaPro
Series parts list. Include the three-
character suffix.(TNR)
PulsaPro
Series part numbers begin either with the letters “NP”, “RS” or the letter “W”,
e.g., NP170001-TNR or W210221-001.