Pulsafeeder PulsaPro 900 EN - Manual (Page 25)

21
7. Maintenance
A LWAYS LOCKOUT / TAGOUT THE PUMP MOTOR BEFORE PERFORMING MAINTENANCE
OF ANY KIND .
B
EFORE PERFORMING ANY MAINTENANCE REQUIRING REAGENT HEAD OR VALVE ( WET
END ) DISASSEMBLY , BE SURE TO RELIEVE PRESSURE FROM THE PIPING SYSTEM .
WHERE HAZARDOUS PROCESS MATERIALS ARE INVOLVED , RENDER THE PUMP SAFE TO
PERSONNEL AND THE ENVIRONMENT BY CLEANING AND CHEMICALLY NEUTRALIZING AS
APPROPRIATE . W EAR ALL REQUIRED PROTECTIVE CLOTHING AND USE PROTECTIVE
EQUIPMENT .
Accurate records from the early stages of pump operation will indicate the type and levels of
required maintenance. A preventative maintenance program based on such records will minimize
operational problems. It is not possible to forecast the lives of wetted parts such as diaphragms
and check valves. Since corrosion rates and operational conditions affect functional material life,
each metering pump must be considered according to its particular service conditions.
PulsaPro
Series KOPkits contain all replacement parts normally used in a preventative
maintenance program. It is recommended that KOPkits and PULSAlube oil be kept available at
all times.
Each
PulsaPro
Series pump is provided with an individual specification data sheet included
with the documentation package. The data sheet contains important information relating to the
application along with pump serial number, pump specifications (i.e., materials, piston size,
stroking rate, etc.).