Pulsafeeder PulsaPro 900 EN - Manual (Page 23)

19
6.2.4 Motor Rotation
Verifying the proper rotation of the motor
a) To verify the correct shaft rotation of the motor you can remove the 3 screws to the
access cover or remove the large pipe plug on the side of the motor adaptor housing.
This will allow you visual sight of the motor coupling to verify rotation.
b) Another way to verify the proper motor rotation is to observe the rotation of the fan
on the motor.
Observing from the rear of the pump the Proper rotation of the input shaft of the
Pro 900 pump is
CLOCKWISE
. Please also refer to the arrow that is cast into the
gearbox for proper rotation.