Aastra Telecom 9480i Series - Manual (Page 964)

Operational, Basic, and Advanced Parameters
A-190 41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
Parameter –
call transfer disabled Configuration Files aastra.cfg, .cfg
Description Enables or disables the Xfer key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Xfer key is ignored.
Format Boolean
Default Value 0 (false)
Range 0 (false), 1 (true)
Example call transfer disabled: 1
Parameter –
map redial key to
Map Redial Key To
(in Web UI)
Aastra Web UI Basic Settings->Preferences->Key Mapping
Configuration Files aastra.cfg, .cfg
Description Sets the Redial key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Redial key returns to its
original functionality.
Note: If you configure the Redial key for speeddialing on the 6757i CT
Base Station, the Redial key on the 6757i CT handset retains its original
functionality. The Redial key on the handset is not configured for
speeddial.
Format Integer
Default Value N/A
Range N/A
Example map redial key to: 5551234
Draft 1