Aastra Telecom 9480i Series - Manual (Page 239)

Network Settings
41-001160-03, Rev 00, Releaes 2.4 4-57
Configuring Network and Session Initiation Protocol (SIP) Features
The following table identifies the default DSCP of protocols.
Configuring Type of Service (ToS)/DSCP (optional)
Use the following procedures to configure ToS/DSCP on the IP phone.
Protocol
Name
Default DSCP
Values in the
ToS Field
sip 26
rtp 46
rtcp 46
Note: ToS/DSCP is enabled by default. The SIP, RTP, and RTCP
parameters show defaults of 26, 46, and 46, respectively. Use the
following procedures to change these settings if required.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Type of Service
(ToS)/DSCP Settings” on page A-44.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Network Settings.
5 Select Type of Service DSCP.
Draft 1