Aastra Telecom 9480i Series - Manual (Page 1145)

Creating an XML Application
41-001160-03, Rev 00, Release 2.4 F-69
Example of Using Multiple “setType” Values
The following is an example of using multiple “setType” values for mutitple
configuration items (softkey1, softkey2).
setType="local">
softkey1 label
Test
setType="override">
softkey2 label
Test
RESULT: The value of “Test” is set for "softkey2 label" using the local rules.
The value of “Test” is set for "softkey3 label” using the override rules. When all
items have been set, the phone reboots.
Limitation
The following is a limitation for the “setType” attribute:
• Using setType=”local” to set a parameter that is not modifiable via the IP
Phone UI or the Aastra Web UI, results in a parameter that can only be
changed via XML.
Draft 1