Draft 1 – Aastra Telecom 9480i Series User Manual
Page 288
Global SIP Settings
4-106
41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Per-Line Configuration
1
Click on Advanced Settings->Line <1 - 9>->Autodial Settings.
2
Do one of the following actions:
•
To allow this line to use the global autodial settings, click on the Use Global Settings parameter
to enable it, then click
to save your changes.
•
To specify a different autodial configuration for this specific line, disable the Use Global
Settings parameter. Then proceed to step 3.
3
In the “Autodial Number” field, specify the SIP number for this line that the IP phone dials
whenever the IP phone is off-hook as follows:
•
If set to -1, then the global autodial settings for this IP phone to this line.
•
If set to empty (blank), then disable Autodial on this line.
•
If set to a valid SIP number, dial the SIP number specified for this line. For example: 8500
Aastra Web UI
Draft 1