Aastra Telecom 9480i Series - Manual (Page 751)

Troubleshooting
41-001160-03, Rev 00, Releaes 2.4 9-5
Troubleshooting
Setting Values for the Module/Debug Levels
There are 6 debug levels for the modules. Each debug level has a value you can
use to turn individual levels ON and OFF. The following table identifies these
debug levels and their values. The value of “1” (fatal errors) is the default setting
for all modules.
KBD (Keyboard module) log module kbd
NET (Network module) log module net
PROVIS (Provisioning module) log module provis
RTPT (Realtime Transport module) log module rtpt
SND (Sound module) log module snd
PROF (Profiler module) log module prof
XML (Extension Markup Lanaguage) log module xml
STUN (Simple Traversal of User Datagram
Protocol (UDP) through Network Address
Translation (NAT) log module stun
Debug Level Value
Fatal Errors 1 (default)
Errors 2
Warnings 4
Init 8
Functions 16
Info 32
All debug levels
OFF 0
All Debug Levels
ON 65535
Aastra Web UI Parameters Configuration File Parameters
Draft 1