Aastra Telecom 9480i Series - Manual (Page 418)

Operational Features
5-120 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Configuring Ring Tones and Tone Sets
Use the following procedures to configure ring tones and tone sets on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files for ring tones, see Appendix A, the section,
“Ring Tone and Tone Set Global Settings” on page A-143 or “Ring Tone Per-Line Settings” on page A-145.
IP Phone UI
Step Action
For global configuration only:
1 Press on the phone to enter the Options List.
2 Select Preferences.
3 Select Tones.
4 Select Set Ring Tone.
5 Select the type of ring tone (Tone 1 through Tone 5, or Silent).
6 Press Done to save the change.
7 Select Tone Set.
8 Select the country for which you want to apply the tone set.
Valid values are Australia, Europe, France, Germany, Italy, Mexico, UK, and US. Default is US.
9 Press Done to save the change.
The ring tone and tone set you select is immediately applied to the IP phone.
Draft 1