Draft 1 – Aastra Telecom 9480i Series User Manual
Page 241
Network Settings
41-001160-03, Rev 00, Releaes 2.4
4-59
Configuring Network and Session Initiation Protocol (SIP) Features
.
Aastra Web UI
Step
Action
1
Click on Advanced Settings->Network->Type of Service,DSCP
.
2
Select a Protocol field:
•
“SIP”
or
•
“RTP”
or
•
“RTCP”
3
Enter a value from 0 to 63. Default values are as follows:
SIP = 26
RTP = 46
RTCP = 46
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
on
For more information, see the section
on
4
Click
to save your settings.
Draft 1
This manual is related to the following products: