Konica Minolta QMS magicolor CX Reference - Manual (Page 73)

Administration
Menu
1-65 Printer Configuration
Disk Operations
» Note: This menu appears only if the printer has a hard disk.
▲ Caution: If you connect to this printer an external hard disk you
previously used with an earlier QMS Crown printer, this QMS
magicolor CX software release will automatically reorganize the files
on the hard disk when the printer is turned back on again. Once this
reorganization is done, the files on the hard disk can no longer be
accessed if the hard disk is reattached to an earlier QMS Crown
printer.
This reorganization process takes time. If, when you first turn the
printer on after attaching a previously used hard disk, it does not
come on line immediately, be patient. Interrupting the reorganization
process could cause all files on the hard disk to be lost.
L
Install Option
Use the Administration/Disk Operations/Install Option menu to add
optional fonts to the hard disk from a font card. This selection copies data
from the card to the hard disk. See chapter 2, “Printer Options,” for
instructions.
Remove Option
Use the Administration/Disk Operations/Remove Option menu to remove
a previously installed optional font. See chapter 2, “Printer Options,” for
instructions.