Konica Minolta QMS magicolor CX Reference - Manual (Page 35)

Administration
Menu
1-27 Printer Configuration
Parallel Interface
Mode
The parallel interface supports Centronics parallel communication as well
as IEEE 1284 bidirectional parallel communication.
Menu
Administration
Communications
Parallel
Mode
Choices
Interactive—Establish two-way communication
between the host and the printer.
Noninteractive (default)—Establish one-way
communication from the host to the printer.
Disabled—Turn off parallel communication with
the host. The printer stops accepting print jobs
over the parallel interface.
Notes: The printer must be restarted for changes to the menu to take
effect. You can either let the printer restart automatically after you save the
change and exit from the Configuration menu, or you can wait for the
change to take effect the next time you manually turn on the printer. See
chapter 3, “Technical Specifications,” for a discussion of the different
modes
Emulation
Sets the parallel interface emulation.
Menu
Administration
Communications
Parallel
Emulation
Choices
ESP (default), Hexdump, PostScript, PCL 5C,
HPGL, Lineprinter
Other optional emulations also appear, if
installed.