Konica Minolta QMS magicolor CX Reference - Manual (Page 27)

Operator
Control Menu
1-19 Printer Configuration
Color Model
Use this option to select between full-color or monochrome printing.
Menu
Operator Control
Color Model
Choices
Monochrome, Full Color (default)
Manual Feed Size
Use this option to select the size of the print medium to be fed
manually.
Menu
Operator Control
Manual Feed Size
Choices
Letter (default), Legal, A4, Executive, Com10,
and DL
Notes: The Envelope setting should be used if your envelope size doesn’t
match any of the other listed envelopes sizes.
Media
Use this option to tell the printer what type of media is in each tray so the
printer can optimize output for that media type.
Menu
Operator Control
Media
Choices
Paper (default), transparency, thick stock
Notes: First select a media tray (upper for the standard cassette slot,
lower for the optional sheet feeder, or manual for the manual-feed tray).
Then select paper, transparency, or thick stock for that tray. When the
Thick Stock media option has been selected, both the Paper LED and the
Transparency LED on the printer control panel are off.
Select Paper for printing paper, envelopes, or labels. Select transparency
for printing on overhead transparency film. Select thick stock (for the
manual-feed tray only) for printing on stock that is between 24 and 43 lb
(90 g/m
2 and 163 g/m 2 ). The factory default is paper.