Konica Minolta QMS magicolor CX Reference - Manual (Page 39)

Administration
Menu
1-31 Printer Configuration
LocalTalk Interface
» Note: The LocalTalk menu appears only if the optional LocalTalk
interface board is installed in the printer.
Use the Administration/Communications/LocalTalk menu to set the
LocalTalk interface values used for printer-host communication.
Mode
Enables or disables the communication interface.
Menu
Administration
Communications
LocalTalk
Mode
Choices
Enabled (default)—Establish one-way LocalTalk
communication (from the host to the printer).
Disabled—Turn off the LocalTalk interface (the
printer stops accepting LocalTalk interface
print jobs).
Notes: The printer must be restarted for changes to the Mode menu to
take effect. You can either let the printer restart automatically after you
save the change and exit the Configuration menu, or you can wait for the
change to take effect the next time you manually turn on the printer.
Minimum Number of Kilobytes for Spooling
Sets the minimum number of kilobytes of system memory
allocated to the LocalTalk interface.
Menu
Administration
Communications
LocalTalk
Min K Spool
Choices
00000-99999
(00015 default)
Notes: This value must be less than the K Mem for Spool value.
A 00000 value does not turn off the spooling buffer for the parallel
interface. If the value is set to 00000, the printer calculates the Min K
Spool automatically at initialization.
The printer must be restarted for changes to the Min K Spool menu to take
effect. You can either let the printer restart automatically after you save the
change and exit from the Configuration menu, or you can wait for the
change to take effect the next time you manually turn on the printer.