Konica Minolta QMS magicolor CX Reference - Manual (Page 101)

The Intellifont
SIMM
2-27 Printer Options
2 Turn the controller board so that the Intellifont SIMM slot is
on the side to you.
3 Insert the SIMM into the connector.
Position the SIMM at a 60° angle to the controller board, with the
notch on the left side and the bottom edge in the connector. Then
push the SIMM forward until you feel it fit into place behind the
clips on either side of the connector. (You may need to use your
fingers to open these clips.) When seated, the SIMM stands at an
angle, firmly in place.
Intellifont SIMM slot
° angle