beautypg.com

Allied Telesis AR400 User Manual

Page 80

background image

Page 80 | AlliedWare™ OS How To Note: IGMP

Configurable IGMP timers and counters > Default Timeout Interval

Increase

Query

Response

Interval

Next, change the Query Response Interval to 200 tenths of a second.

The Default Timeout Interval = (2*130) + (200/10) = 280 seconds.

Reduce

Intervals

Next, reduce the Default Query Interval to 125 seconds and the Query Response Interval to
100 tenths of a second again.

The Default Timeout Interval = (2*125) + (100/10) = 260 seconds.

Manager Switch 1> set ip igmp queryresponseinterval=200

Info (1005003): Operation successful.

Manager Switch 1> show ip igmp

IGMP Protocol

------------------------------------------------------------------------

Status ........................... Enabled

Default Query Interval ........... 130 secs

Default Timeout Interval ......... 280 secs

Last Member Query Interval ....... 10 (1/10secs)

Last Member Query Count .......... 2

Robustness Variable .............. 2

Query Response Interval .......... 200 (1/10secs)

.

.

.

Manager Switch 1> set ip igmp queryinterval=125

Info (1005003): Operation successful.

Manager Switch 1> set ip igmp queryresponseinterval=100

Info (1005003): Operation successful.

Manager Switch 1> show ip igmp

IGMP Protocol

------------------------------------------------------------------------

Status ........................... Enabled

Default Query Interval ........... 125 secs

Default Timeout Interval ......... 260 secs

Last Member Query Interval ....... 10 (1/10secs)

Last Member Query Count .......... 2

Robustness Variable .............. 2

Query Response Interval .......... 100 (1/10secs)

.

.

.

This manual is related to the following products: