Configure switch 3 – Allied Telesis AR400 User Manual
Page 50

Page 50 | AlliedWare™ OS How To Note: IGMP
Static IGMP > Example
Switch 3 is also an IGMP Snooper. Later in this example, we will add a static IGMP entry on
this switch.
"Modify switch 3 Configuration" on page 52
shows the extra commands for this.
X
Configure switch 3
set system name="Switch 3"
# STP general configuration
enable stp=default
set stp=default mode=rapid
set stp port=3 edgeport=yes
# VLAN general configuration
create vlan=vlan100 vid=100
add vlan=100 port=1-26