Aastra Telecom M760E - Manual (Page 43)

37
The programmable keys
37
Tone
Programming
a series of codes: This involves programming a series of codes that will be
interpreted by the set during the progress of a call.
You can, for example, program the sequence for access to
a server.
1 - Press the Tone interactive key.
The display prompts you to enter the code.
2 - Enter the Sequence .
Example: enter the access code to a server followed by #.
. If you make a mistake, use the
Erase interactive key.
. To insert a pause between two series of codes, press the
Pause1 or Pause2 interactive keys*.
3 - Press the Enter interactive key to accept the programming.
The display shows the programming.
This way, simply pressing this key when using the set
during a call will provide you with all expected information
and will give you fast access to the expected service.
Enter
sequence
Mute 5 - Press the Mute interactive key.
The display shows the programming.
This way, the lamp associated with the programmed key
will inform you about telephone usage by the co-worker
concerned, and you will be able to call the correspondent
by simply pressing the key.
Deleting, modifying and exiting programming
Erase
After having programmed a key, The display shows
the programming status of this key, and will give you various
possibilities.
- Press the Erase interactive key to erase the programming
shown.
* Depending on the features provided by your system operator