Asante Technologies 1012 User Manual
Page 92
Page 3-36
Chapter 3 — AsantéBridge 1012 Local Management
You can reset the AsantéBridge 1012 in three different ways:
❏
Cycle the power
. This resets both the bridge and hub
portions of the device. The repeater is not affected.
❏
Push the
Reset button
on the front panel. This resets
both hub and bridge.
❏
Send the
Reset system
command from the
Configura-
tion Menu
. This resets both the bridge and the hub.
Figure 3-21 Resetting the Bridge
1
Use the
arrow keys
to select the
Reset system
command.
2
Press
return
to reset the bridge.
Confirmation is required.
The command executes only
after you have confirmed your choice.
Your display will begin to cycle through the bridge power-
on diagnostics and return to the
Local Management
Menu
.
3
Enter
control-z
to return to the
Local Management Menu.
Remember that a reset:
❏
Resets the bridge and hub statistics counters to zero
❏
Erases any packets in bridge and hub memory at the
time of the reset
❏
Prevents the bridge from forwarding or filtering data
flow until the power-on diagnostics have run to comple-
tion and the bridge has completed reconfiguring
❏
Erases dynamic forwarding addresses
Resetting the Bridge