Asante Technologies 1012 User Manual
Page 75
Page 3-19
Configuration Menu System
3
Press
return
to set the new value.
4
Repeat
steps 1-3
for any other fields you want to modify.
5
Highlight the
COMMUNITY STRING
field for the IP
address you want and press
return
to open the data entry
bar.
6
Enter the new string; press
return
to set the value.
7
Repeat steps
5-6
for the other community string fields.
8
Highlight the
STATUS
field you want to modify.
9
This is a toggle. Press the
spacebar
or
return
to switch.
10
Again using the arrow keys, highlight the
SNMP Authenti-
cation Trap
field.
11
This is also a toggle. Press the
spacebar
or
return
to switch
between
Enabled
and
Disabled
.
12
Enter
control-z
to return to the
SNMP Agent Parameters
Menu
.
SNMP Community Name Table
Figure 3-12 SNMP Community Name Table