Asante Technologies FRIENDLYNET FR1104-G User Manual
Friendlynet, Fr1100 series routers

FR1104-G Rear Panel
FriendlyNET
®
Faster, Easier, and Safer Networking
w w w . a s a n t e . c o m
w w w . a s a n t e . c o m
• • •
• • •
• • •
FR1100 Series Routers
Thank you for purchasing an Asanté
FriendlyNET FR1100 Series router. This router
will allow you to share your high-speed
Internet connection with other computers on
your network. To ensure smooth operation,
you will need to configure the router to match
your current Internet Service Provider (ISP).
System Requirements
Before you begin, please verify that you have
the following items:
• Valid Internet connection with user name
and password.
• Broadband (cable or DSL) modem with a
10BaseT port (PCI-based modems are not
supported).
• Network connection for each computer – a
10/100 Fast Ethernet adapter or built-in
10/100 Fast Ethernet port (RJ-45).
AsantéFast 10/100 or FriendlyNET 10/100
PCI recommended.
• Network cable from the router to each
computer. Unshielded twisted pair (UTP)
Category 5 cable is required.
• Supported operating systems:
– Apple Mac OS (8, 9 and X)
– Microsoft Windows (98, 2000, NT and XP)
– Linux/UNIX
• TCP/IP network protocol must be
configured for each computer (refer to
computer configuration on reverse). Each
client must also be configured to accept an
IP address from a DHCP server.
• You will also need a web browser to
configure the router. Microsoft Internet
Explorer or Netscape Communicator
version 4 or later is required.
If you have the FriendlyNET FR1104-G
wireless router, these items are optional:
• Wireless network connection for each
computer. A built-in 802.11b/g (Airport,
Wi-Fi) or adapter for each computer.
FriendlyNET AeroLAN adapters
recommended.
Incompatibilities
Cable or DSL modems using USB or Firewire
connections, asymmetrical dual media
connections, Home PNA or any other non-
Ethernet compatible communication devices
are not compatible with the FriendlyNET
FR1100 Series routers.
Asanté Mak
es Network
ing Simple
Se
tting up your r
outer r
equires thr
ee
basic steps:
1. Install y
our hardwar
e.
2. D
ete
rmine the TCP/IP settings f
or your
specific comput
er follo
wing the instructions
pro
vided for y
our operating syst
em.
Tip:
Reco
rd
your inf
ormation and save
it for
future r
efe
renc
e. Y
ou will need to
have
these
settings if you ev
er change rout
ers, c
omputers
or servic
e plans.
3. C
onfigure y
our rout
er.
Hard
wa
re
Installation
Tu
rn off the pow
er t
o y
our comput
ers,
modem and rout
er, then f
ollow these st
eps
to
connec
t the rout
er to
your netw
ork:
1. C
onnect an Ethernet cable fr
om your
comput
er’s
Ethernet port t
o one of the LAN
ports (number
ed 1–4) on the rout
er.
Repeat the proc
ess to
connec
t other
comput
ers to
the rout
er.
2. C
onnect an Ethernet cable fr
om your cable
or DSL modem to
the rout
er’s
W
AN port.
Tip:
FR1100 Se
ries rout
ers support A
uto
-
Uplink
™
. If
you need t
o c
onnect mor
e than
four c
omputers t
o the r
outer
, y
ou can
uplink a 10/100 Fast Ethernet swit
ch
(pref
erred) or hub using an Ethernet cable
to
any LAN por
t on the r
outer
. FR1100
Se
ries rout
ers support up t
o 253 c
ompters
and netwo
rk devices
.
3. C
onnect the po
we
r co
rd
to
the rout
er then
turn on your c
omputers and modem.
Determining Network S
ettings
Fo
llow
the Comput
er Configur
ation steps
for y
our comput
er’s
operating syst
em.
FR1104-G Cable/DSL 802.11g
Wireless Firewall Router with
Integrated 4-Port 10/100 Switch
FR1104-G Front Panel
Computer C
onfigura
tion
Th
e follo
wing steps explain ho
w to
determine
your curr
ent netw
ork settings and set up y
our
co
mputer so that it can be aut
omatically
co
nfigured b
y the r
outer
’s DHCP (dynamic
host configur
ation prot
ocol) f
eatur
e.
1. F
rom the Apple menu
, open y
our
co
mputer
’s
TCP/IP c
ontr
ol panel.
2. In the
Co
nnect Via
drop-do
wn list, selec
t
your Ethernet adapt
er. In
Co
nfigure
, selec
t
Using DHCP S
erv
er.
3. T
he DHCP screen bef
ore
re
ceiving a
dynamic IP address fr
om the Asanté
ro
uter looks as f
ollows:
4. T
he DHCP screen af
ter r
eceiving a
dynamic IP address fr
om the Asanté
rout
er looks as follo
ws:
5. Close the
TCP/IP c
ontr
ol panel and Sav
e
the settings.
Th
e TCP/IP c
onfiguration of y
our comput
er
is now c
omplete
. Repeat these st
eps to
configur
e additional Mac OS 8 or 9
co
mputers y
ou wish to
add to
the rout
er.
Router Configuration
All Operating Systems
The router must be configured to match your
Internet service. If you do not know your
Internet connection configuration, please
contact your Internet Service Provider (ISP).
By default, the router is pre-configured with
these settings:
• Automatically set IP addresses for
computers on your LAN (connected to the
router’s ports 1–4). The router acts as a
server for dynamic host configuration
protocol (DHCP) and assigns IP addresses
in the range 192.168.123.100 through
192.168.123.199
• The default LAN IP address for the router is
192.168.123.254 with a subnet mask of
255.255.255.0
• The Internet service connected to the
router’s WAN port uses a dynamic IP
address
Note: To configure the router, you will need
to use the information you collected when
determining network settings (Computer
Configuration) for your operating system.
1. Start your browser and type
http://192.168.123.254 in the location
field. Press Enter.
2. Log in to the router using the default
password (“admin”) and click the Log in
button.
3. From the top navigation bar, click on the
Wizard link.
4. Follow the on-screen instructions.
5. Fill in the network settings using the
information gathered during Computer
Configuration.
6. When you are finished, click Save. You will
be prompted to restart your router for
changes to take effect. Click the Restart
Router button and follow the prompts.
Your router will be restarted and you will
have to log in again.
7. Restart all the computers on your network.
8. To verify your Internet connection, try
connecting to the www.asante.com
website from your web browser.
The basic configuration of your Asanté
router is now complete. See the User’s
Manual for additional information on
advanced settings.
Apple Mac OS 8 and 9
(See r
ev
erse for M
ac OS X)
© 2004 Asanté Technologies, Inc. Asanté, FriendlyNET and AeroLAN are registered trademarksof Asanté Technologies, Inc. The Asanté logo and Auto-Uplink
are trademarks of Asanté Technologies, Inc. All other brand names and products are trademarks or registered trademarks of their respective holders. All
features and specifications are subject to change without prior notice. 06-00697-00 (01/04)