Asus TW510-E2 - Manual (Page 57)

2 - 3 9 2 - 3 9 2 - 3 9 2 - 3 9 2 - 3 9 A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2
To install the front I/O board:
1. Place the I/O board in the bracket,
component side up. Secure the front
I/O board to the bracket with a
screw.
2. Position the I/O board into the bay
with the component side to the left
(close to the HDDs), then connect
the I/O cables to the connectors on
the back of the I/O board. Refer to
“2.9.1 Motherboard connections” for
details on cable connections.
3. Insert the I/O board into the bay
until the bracket fits the front edge
of the bay.
4. Secure the I/O board bracket with a
screw.