Super i/o device – Asus TW510-E2 User Manual

Page 108

5 - 2 8

C h a p t e r 5 : B I O S s e t u p

Super I/O Device

This sub-menu contains RAID-related function items. Select the items that
you wish to enable to create a RAID set.

Serial Port1 Address [3F8/IRQ4]

Allows you to select the serial port 1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3] [Auto]

Onboard Parallel Port [378/IRQ7]

Allows you to select the parallel port base address.
Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]

Parallel Port Mode [SPP]

Allows you to select the parallel port mode.
Configuration options: [SPP] [EPP] [ECP] [ECP+EPP] [Normal]

IDE Primary Master/Slave, IDE Secondary Master/Slave RAID [Disabled]

When enabled, allows you to use the device/s for creating a RAID set.
Configuration options: [Disabled] [Enabled]

First/Second/Third/Fourth SATA Master RAID [Disabled]

When enabled, allows you to use the device/s for creating a RAID set.
Configuration options: [Disabled] [Enabled]

F1:Help

↑↓

↑↓ : Select Item

-/+: Change Value

F5: Setup Defaults

ESC: Exit

→←

→←: Select Menu

Enter: Select Sub-menu

F10: Save and Exit

Phoenix-Award BIOS CMOS Setup Utility

Advanced

Select Menu

Item Specific Help

Set base I/O address
for serial port 1.

Super I/O Device

Serial Port1 Address

[3F8/IRQ4]

Onboard Parallel Port

[378/IRQ7]

Parallel Port Mode

[SPP]

EPP Mode Select

EPP1.7

ECP Mode Use DMA

Game Port Address

[201]

Midi Port Address

[330]

Midi Port IRQ

[10]