5 pcipnp pcipnp pcipnp pcipnp pcipnp, Resources controlled by [auto, Pci/vga pallet snoop [disabled – Asus TW510-E2 User Manual

Page 110: Maximum payload size [4096

5 - 3 0

C h a p t e r 5 : B I O S s e t u p

F1:Help

↑↓

↑↓ : Select Item

-/+: Change Value

F5: Setup Defaults

ESC: Exit

→←

→←: Select Menu

Enter: Select Sub-menu

F10: Save and Exit

Phoenix-Award BIOS CMOS Setup Utility

Advanced

5.4.5

PCIPnP

This menu shows the PCIPnP configuration settings. Select an item then
press to display a pop-up menu with the configuration options.

Select Menu

Item Specific Help

BIOS can automatically
configure all the boot
and Plug and Play
compatible devices. If
you choose Auto, you
cannot select IRQ DMA
and memory base address
fields, since BIOS
automatically assigns
them.

PCIPnP

Resources Controlled By

[Auto]

IRQ Resources

PCI/VGA Pallete Snoop

[Disabled]

** PCI Express relative items **

Maximum Payload Size

[4096]

Resources Controlled By [Auto]

Allows automatic or manual assignments of IRQ resources to boot devices
and Plug and Play devices. Configuration options: [Auto] [Manual]

When the item R e s o u r c e s C o n t r o l l e d B y

R e s o u r c e s C o n t r o l l e d B y

R e s o u r c e s C o n t r o l l e d B y is set to [Auto], the item

IRQ Resources is grayed out and not user-configurable. Refer to the
section “IRQ Resources” for information on how to enable this item.

PCI/VGA Pallet Snoop [Disabled]

Some non-standard VGA cards, like graphics accelerators or MPEG video
cards, may not show colors properly. Setting this field to [Enabled]
corrects this problem. If you are using a standard VGA card, leave this field
to the default setting [Disabled]. Configuration options: [Disabled]
[Enabled]

Maximum Payload Size [4096]

Sets the maximum TLP payload size (in bytes) for PCI Express devices.
Configuration options: [128] [256] [512] [1024] [2048] [4096]