Asus P4-P5N9300 - Manual

E4261
P2-P5N9300/P4-P5N9300 Display Setting
15G067524000
Windows ® XP/Vista OS
By default, the primary display adapter is set to the graphics card.
To set the onboard VGA/HDMI port as the primary display adapter:
1. Connect your monitor to the graphics card.
2. Boot the system and press during the Power-On Self-Test (POST) to
enter the BIOS setup program.
3. Go to Advanced > Chipset. Set the Primary Display Adapter item to
[Onboard] and Onboard GPU to [Always Enable].
4. Press to save the changes, then the system reboots.
5. Disconnect your monitor from the graphics card, then connect it to the
onboard VGA/HDMI port during the system reboot process.
The NVIDIA ® Hybrid SLI ® feature is automatically enabled when you install a total
system memory of 2GB or more. This feature is supported by Windows ® Vista OS
only.