Asus TW510-E2 - Manual (Page 114)

5 - 3 4 5 - 3 4 5 - 3 4 5 - 3 4 5 - 3 4 C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
F1:Help ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →← →← →← →← →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
5.5.1 5.5.1 5.5.1 5.5.1 5.5.1 APM Configuration APM Configuration APM Configuration APM Configuration APM Configuration
This menu shows the Advanced Powed Management (APM) configuration
settings. Select an item then press to display a pop-up menu with
the configuration options.
Select Menu
Item Specific Help
This field allows you to
set the automatic power
saving features.
APM Configuration
Power Management [User Define]
HDD Power Down [Disabled]
Video Off Method [PDMS Support]
Soft-Off by PBTN [Instant-Off]
Restore on AC Power Loss [Power Off]
Power On By PCI Devices [Disabled]
WOR(RI#) From Soft-Off [Disabled]
USB Wake-Up From S1/S3 [Disabled]
Power-On By Alarm [Disabled]
Day of Month Alarm 0
Time (hh:mm:ss) 0 : 0 : 0
Power On Function [Disabled]
Power On By PS/2 Mouse [Disabled]
Power Management [User Define] Power Management [User Define] Power Management [User Define] Power Management [User Define] Power Management [User Define]
Allows you to set the automatic power saving features.
Configuration options: [User Define] [Min Saving] [Max Saving]
HDD Power Down [Disabled] HDD Power Down [Disabled] HDD Power Down [Disabled] HDD Power Down [Disabled] HDD Power Down [Disabled]
Shuts down any hard disk drives in the system after a period of inactivity
as set in this field.
Configuration options: [Disabled] [1 Min] [2 Min]... [15 Min]
Video Off Method [DPMS Support] Video Off Method [DPMS Support] Video Off Method [DPMS Support] Video Off Method [DPMS Support] Video Off Method [DPMS Support]
Allows you to select the video off method. The Display Power Management
System (DPMS) feature allows the BIOS to control the video display card if
it supports DPMS. [Blank Screen] only blanks the screen. Use this for
monitors without power management or “green” features.
Configuration options: [Blank Screen] [V/H Sync+Blank] [DPMS Support]
Soft-Off By PBTN [Instant-Off] Soft-Off By PBTN [Instant-Off] Soft-Off By PBTN [Instant-Off] Soft-Off By PBTN [Instant-Off] Soft-Off By PBTN [Instant-Off]
When set to [Instant-Off], the system goes to soft-off when you press the
power button for less than 4 seconds. When set to [Delay 4 Sec], the
system power goes off when you press the power button for more than 4
seconds. Configuration options: [Delay 4 Sec] [Instant-Off]
Phoenix-Award BIOS CMOS Setup Utility
Main Advanced Power Boot Exit