HID Prox Programmer Installation Guide - Manual (Page 7)

Page 4
HID ProxProgrammer Operation Manual 1050-904 Rev B
Getting Started
1. On the Start Menu, locate and highlight the Program group HID. Click on the HID ProxProgrammer
icon. This will launch the program.
2. Once the program is launched a COM Port selection screen will appear. If your HID
ProxProgrammer is attached to the default COM Port (1) and it is plugged in, press
OK to continue.
3. If the program does not detect the HID ProxProgrammer in the default COM port 1, you will receive
an error message. Press
OK.
4. If you are not using the default settings, you must a select a different COM Port.
Starting HID ProxProgrammer Software