HID Prox Programmer Installation Guide - Manual (Page 12)

Page 9
HID ProxProgrammer Operation Manual 1050-904 Rev B
6. Choose the desired format from the list of formats available.
7. After the desired format is selected, return to the programming screen and select the Order # to
program.
To switch to
manual advance,
press the
Advance button.
The message in
the title bar will
indicate how it is
set.
You can now print
while in the
programming
screen. For more
information on
Printing, refer to
the section
Printing Tags on
page 10.
8. Once you select the Order #, position a tag on the programmer. Use the tag with the # specified in
the dialogue box. Click the
PROGRAM button. The programmer will beep once, if it is successful.
The counter on the screen will advance and prompt you to place the next tag in the sequence on the
programmer.
9. The Programmer is set to automatically advance to the next tag in the programming sequence. If
you want to manually advance to the next tag, first change to Manual Advance mode by clicking
on the
ADVANCE button. (The message in the header of the screen will now read: Manual
Advance.) Then press the
NEXT TAG button to advance to the next tag in the sequence.
WARNING: When in Manual Advance, if you forget to press NEXT TAG, you will program the
same card number again.
Programming