HID Prox Programmer Installation Guide - Manual (Page 16)

Page 13
HID ProxProgrammer Operation Manual 1050-904 Rev B
Change the printer settings
1. In the Layout screen, right-click the mouse button.
2. Select the
PRINT option. Now select the PRINT SETUP option. This will allow you to
change the orientation of the tag number from portrait to landscape or to select another printer.
Press
OK.
To exit the Layout screen, click the X box in the upper right corner of the layout window. The
program will prompt you to confirm the saved changes. Answer
YES if you want to save the
changes and
NO if you do not want to save the changes.
IMPORTANT NOTE: If any errors are made while using the layout designer or any
undesirable changes have been made, simply say NO to the Save Changes prompt when
exiting the Layout screen.
The Report Menu is not utilized by HID ProxProgrammer Software.
Read Tags
1. After you have programmed the tags in an order, you can verify the tag information by selecting
Read Tags from the Card Order Operations menu.
2. The current Format type is displayed in the top part of the screen. To change the format type, press
the
FORMAT LIST button. The Format selection screen will open. Select the desired format from
the list and click
OK.
Read Tags