HID Prox Programmer Installation Guide - Manual (Page 17)

Page 14
HID ProxProgrammer Operation Manual 1050-904 Rev B
3. Once the desired format is selected, place the tag on the HID Field Programmer and press the
READ TAG button. If the tag is supported by the selected format, information about the tag will be
displayed in the dialogue box. If the tag is not supported by the selected format, a
Read Error
message will be returned. This can indicate that the tag is damaged or the incorrect format has been
selected.
4. To read additional tags place a new tag on the programmer and press the
READ TAG button.
Fallout Replacement
1. To replace a lost or damaged card in an order select the
Card Order Operations menu and
highlight
Fallout Replacement.
2. Select the Order # from the drop down menu. If a format error message is returned after the order
number is selected, you will need to select a different format.
3. Select the
Programmer Options menu and highlight Select a Format.
4. Choose the desired format from the list of formats available.
5. After the desired format is selected, return to the Fallout Replacement screen and select the Order #.
6. Enter in the appropriate box the externally marked tag number to be replaced.
Fallout Replacement
Fallout is described as any tags in an order that fail to meet any customer standard for any reason.
Example: Tags that fail to read at proper distance or those that have cosmetic defects and need to be
replaced in the order. This option is generally used after an order has been programmed.