HID EDGE EVO EH400-K Standard Controller Installation Guide - Manual (Page 11)

82000-921 C.0
INSTALLATION GUIDE 11 ©2009 - 2011 HID Global Corporation. All rights reserved.
Standard Networked Controller
EH400-K
Hi-O Interface Modules
Hi-O interface modules are used to expand functionality of the EDGE EVO Networked Controller. Hi-O interface modules
connect the native Hi-O bus with additional components around and behind doors and other access points.
For Hi-O interface module wiring, see their prospective Installation Guides.
Go to
www.hidglobal.com > Support > Document Library.
Search the document type as a Installation Guide.
Model Description Part Number
EDM-M EDGE EVO Door Module 82342
EIM-M EDGE EVO Input Module 82340
EWM-M EDGE EVO Reader Module 82360
EDWM-M EDGE EVO Door & Reader Module 82363AM
ELM EDGE EVO Lock Module 82301
EVM EDGE EVO Voltage Module 82365
Glossary
Acronym Description Acronym Description
AC Fail AC Power Failure Input GND Ground
AUX Auxillary Output GRN LED Green LED Output
BATT Fail Battery Failure Input GRP SEL Group Select
CAN_H Hi-O CANbus High NC Normally Closed
CAN_L Hi-O CANbus Low NO Normally Open
CLK Clock PIR Passive Infared device
COM Common PoE Power over Ethernet
Data0 Wiegand Data 0 Input RED LED Red LED Output
Data1 Wiegand Data 1 Input REX Request-to-Exit Input
Door Mon Door Monitor Input RLY Relay
DS Door Strike