Nikon D2Xs - Manual (Page 226)

212
Menu Guide—Custom Settings
Custom Setting f8: Disable Shutter If No CF Card
This option can be used to enable the shutter
re lease when no memory card is inserted in the
cam era. Note that when photographs are being
cap tured to a computer using Cam
era Control
Pro (available separately), pho to graphs are not
recorded to the cam era mem o ry card and the
shutter release will be en abled re gard less of the
setting chosen for this option.
Highlight f8 No CF card? in the second level of the CSM menu ( 181) and
press the multi selector to the right. Press the multi selector up or down to
highlight an option, then press to the right to make a selection.
Option Description
Off Shutter-release button enabled even when no memory card is inserted.
On
(default) Shutter-release button disabled when no memory card is inserted.
Custom Setting f7: Setting Method for Buttons and Dials
This option allows adjustments that are normally
made by holding a button and rotating a com-
mand dial to be made by rotating the command
dial after the button is released. Highlight f7 But-
tons and dials in the second level of the CSM
menu (
181) and press the multi selector to the
right. Press the multi selector up or down to highlight an option, then press
to the right to make a selection.
Option Description
Hold
Default
(default) Changes to settings made by rotating command dial while button is held
down.
Settings can be changed by rotating command dial after button is released.
To exit, press button again, press shutter-release button halfway, press
,
, , , ISO, QUAL, or WB button, or (except when No limit is select-
ed for Custom Setting c3 or optional adapter is used) wait for about 20 s.