Software download to the x-switch cpu, Entering software download parameters, Ge 53 – Avaya M-ACCF/SF User Manual
Page 69
Chapter 4
X-Switch CLI & ATM Terminal Interface
Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide
53
Note:
The “Reset the Module” option does not reset the entire hub; it resets the
selected module only.
Software Download to the X-Switch CPU
You can download software to the X-Switch entity (CPU) of the M-ACC module
using the TFTP/IP protocol. To enable the process, make sure there’s a reachable
TFTP server in the network.
To download a software update to the M32-100T, use the Software Download
option (option 2 from the Setup Main Menu). A screen similar to the following
displays:
Software Download parameters (Using TFTP/IP).
M-ACCF S/W Version: 4.0.7 Slot #: 5
0. Return to Previous Menu
1. Save the Session
2. List
----------------------------
3. TFTP Server and File parameters...
4. Start Software Download process
5. Monitor software download process...
>>>Enter your choice:
Entering Software Download Parameters
Select option 3 to enter the TFTP server, file and version parameters. The following
prompts are displayed, with the current parameters displayed in every line:
TFTP Server IP address: 149.49.39.12
File Name: /home3/users/gk/vx/960cf/M-ACCF
Downloaded file will override the old version (4.0.7)
-----------------------------------------------------------
>>>Enter Server IP address [nnn.nnn.nnn.nnn]:135.49.60.115
>>>Enter File Name: c:\mng\agents\Macc
>>>Override version: 1 - (Version 4.0.7), [2 - (Version 4.0.7)]: 1
1
Enter the TFTP Server IP address.
2
Enter the filename (Macc) of the new software version (full path).
3
Enter the version you wish to overwrite.
The M-ACC stores two software versions. It is recommended that you
overwrite the oldest version. See the version number to find out which is the