Avaya M-ACCF/SF - Manual (Page 51)

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide 35
Chapter 3
Installation
Installing the M-ACC Module
Safety Information
Warning: Before installing or removing any components of a device, or carrying out
any maintenance work, you must read the safety information provided in Appendix
A, Important Safety Information. Disconnect the device from the main power
supply.
Warning: Installation and removal of the ATM access module must be carried out by
qualified personnel only. Before installing the module into a unit, you must first
disconnect the unit from the mains power supply.
Caution: Only hold the ATM module by the edges to avoid damage from static. Do
not touch the top or bottom of the circuit board. If possible, wear a wrist-strap and
use an anti-static bag.
The multimode Avaya M-ACCF ATM access module is a Class 1 LED product. The
single-mode M-ACCSF module is a Class 1 Laser product. They comply with EN
60825-1 and Food and Drug Administration (FDA) 21 CFR 1040.10 and 1040.11.
The modules must be operated under recommended operating conditions.