American Power Conversion 10-30 KVA - Manual (Page 44)

Electrical Installation – Connection of APC Humidity Sensor
38 Smart-UPS® VT 10-30 kVA, 208/220 V Site Preparation and Installation Manual 990-1598B
 Remove the 2 screws from the cable inlet at the front – and remove cable-inlet plate.
 Guide the cable through the hole in the bottom plate and up through the cable inlet.
Note
The Humidity Sensor is provided in a plastic bag attached to the front of the UPS.
10/100Base-T Probe
AP9619 Network Management Card EM
!
Reset
Output Pwr Zone
10/100
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT




10/100Base-T Probe
AP9619 Network Management Card EM
!
Reset
Output Pwr Zone
10/100
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT

See “Foot print” on page 8 to locate the communication cable inlet.