Blodgett Mark V-100 XCEL - Manual (Page 16)

14
Operation
Solid State Digital control with humidaire
1
2
3
8
7
10
4
5
6
9
11
14
12
13
15
control DeScriPtion
1. SELECTOR SWITCH - controls power to the oven for
high fan, low fan or cool down.
2. DISPLAY - displays time or temperature and other
information related to oven function.
3. HEAT LAMP - lights when heater is on.
4. PULSE LAMP - lights when Pulsed Fan Mode is
turned on.
5. HOLD LAMP - lights when Hold Mode is turned on.
6. DIAL - used to enter set points in display
7. START/STOP KEY - starts or stops the timer.
8. TIME KEY - used to show time in the display.
9. TEMP KEY - used to show set temperature in the
display.
NOTE: Actual temperature is shown while the
TEMP key is held down.
10. HOLD KEY - turns Hold Mode on or off.
11. PULSE KEY - turns Pulse Mode on or off.
12. LIGHTS SWITCH - controls interior lights.
13. HUMIDAIRE START SWITCH - activates moisture
injection for a preset period of 30 seconds.
14. HUMIDAIRE LAMP - lights when water is being in-
jected
15. CIRCUIT BREAKER SWITCH - controls power to the
oven.
Figure 11