Blodgett Mark V-100 XCEL - Manual (Page 13)

11
Operation
Solid State manual control
1
2
3
4
5
6
Figure 9
control DeScriPtion
1. SELECTOR SWITCH - controls power to the oven for
high fan, low fan or cool down.
2. OVEN READY LIGHT - when lit indicates elements
are heating. When the light goes out the oven has
reached operating temperature.
3. SOLID STATE THERMOSTAT - allows an infinite se-
lection of temperatures from 150-550°F (66-288°C).
(infinite control shown)
4. TIMER - activates an electric buzzer that sounds
when the cook time expires.
5. LIGHTS SWITCH - controls interior lights.
6. CIRCUIT BREAKER SWITCH - controls power to the
oven.
oPeration
1. Turn the SELECTOR Switch (1) to either HIGH FAN
or LOW FAN. The blower and control compartment
cooling fan operate and are controlled automatically
by the action of the doors.
2. Set the SOLID STATE THERMOSTAT (3) to the de-
sired setting or temperature.
3. Preheat until the OVEN READY LIGHT (2) goes out.
4. Load product into the oven. Determine cook time and
set the TIMER (4).
5. When the buzzer sounds, remove the product from
the oven. Turn the TIMER knob (4) to OFF to silence
the buzzer.
6. Turn the SELECTOR Switch (1) to OVEN OFF.
oven cool Down:
1. Turn the SELECTOR Switch (1) to COOL DOWN.
NOTE: The doors may be opened to speed the
cooling process.
oven Shut Down:
1. Turn the SELECTOR SWITCH (1) to OVEN OFF.