beautypg.com

Operation, Solid state digital control – Blodgett Mark V-100 XCEL User Manual

Page 14

background image

12

Operation

Solid State Digital control

1

2

3

8

7

10

4

5

6

9

11

13

12

Figure 10

control DeScriPtion
1. SELECTOR SWITCH - turns power to the oven on

or off. Allows selection of Cook or Cool Down Modes

and fan speed (if applicable).

2. DISPLAY - displays time or temperature and other in-

formation related to oven function.

3. HEAT LAMP - lights when heater is on.
4. PULSE LAMP - lights when Pulsed Fan Mode is

turned on.

5. HOLD LAMP - lights when Hold Mode is turned on.
6. DIAL - used to enter set points in display
7. START/STOP KEY - starts or stops the timer.
8. TIME KEY - used to show time in the display.
9. TEMP KEY - used to show set temperature in the dis-

play.

NOTE: Actual temperature is shown while the

TEMP key is held down.

10. HOLD KEY - turns Hold Mode on or off.
11. PULSE KEY - turns Pulse Mode on or off.
12. LIGHTS SWITCH - controls interior lights.
13. CIRCUIT BREAKER SWITCH - controls power to the

oven.

ProGramminG
to set the cook temperature:
1. Press TEMP (9) key.
2. Rotate dial (6) to enter temperature.
to set the cook time:
1. Press TIME (8) key.
2. Rotate the dial (6) to enter time.

NOTE: Time is entered in hours:minutes (0:00) or

minutes:seconds (00:00).

to set the hold time:
1. Press HOLD key (10) to turn hold mode on.

NOTE: HOLD light is on.

2. Rotate dial (6) to enter the hold temperature.
3. Press START/STOP key (7)