Hubbardton Forge 366520 - Manual (Page 2)

Installation Instructions
A277
For Ceiling Fixture 36-6515 & 36-6520 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 26601
To Install Glass (Figure 2)
Component Parts
J Retaining Ring
K Glass
L Socket
M Retaining Ring Tool
N Bulb
1. Remove retaining ring (J) from socket (L). Retaining Ring is
shipped installed.
2. Place glass (K) over socket (L).
3. Replace retaining ring (J) and tighten with retaining ring tool
provided (M) until snug against glass (K). Do not over-tighten.
4. Install bulb (N). (Included). Be careful not to touch bulb with
bare hands; oil from the hands will dramatically reduce bulb
life.
5. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)