Hubbardton Forge 356005 - Manual (Page 2)

Installation Instructions
A38
For Semi-Flush Mount Outdoor Fixtures 35-6005 & 35-6005F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 14581 Rev A
To Install Glass (Figure 2)
Component Parts
H Retaining Ring
I Glass
J Socket
K White
Washer
1. Remove retaining ring (H) from socket (J). Retaining Ring is shipped
installed.
2. Place glass (I) over socket (J).
3. Slip white washer (K) onto socket (J) until it rests against the inside
top of the glass (I).
4. Replace retaining ring (H) and tighten until snug against white washer
(K) to secure glass. Do not over-tighten.
5. Install light bulb. “F” version bulb is included
6. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you
purchased this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)