Hubbardton Forge 307880 - Manual (Page 2)

Installation Instructions
B144
For After Hours Wall Sconce 30-7880F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735
21222 Rev B
To Install Glass (Figure 4)
Component Parts
E Fixture Assembly
H 8-32 x 1" Screw (2)
I Top
Plate
J Acrylic Tube
K Bracket
L Tension
Knob
1. Slide acrylic tube (J) in to fixture assembly (E).
2. Slip top plate (I) on to fixture assembly (E) until it rests on top of acrylic tube (J).
3. Adjust tension knob (L) until it rests against the back side of the acrylic tube (J).
4. Slip 8-32 x 1" screw (H) through top plate (I) and thread in to bracket (K) and
tighten (be careful not to over tighten).
If you need further assistance, or find that you are missing any parts, please contact the
dealer from which you purchased this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)
(Figure 4)