Hubbardton Forge 307525 - Manual (Page 2)

Installation Instructions
B141
For Ellipse Outdoor Wall Sconce 30-7521, 30-7521F, 30-7525 & 30-7525F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 21192
To Install Glass (Figure 3)
Component Parts
C Fixture
F Glass
G Retaining
Ring
H Socket
I Socket
Tool (provided only with 30-7521 & 30-7521F)
1. Remove retaining ring (G) from socket (H).
2. Slip glass (F) over socket (H).
3. Thread retaining ring (G) onto socket using socket tool provided (I) until it rests
on inside of glass (F).
Note: Socket tool is only used for products 30-7521 & 30-7521F. Do not over
tighten.
4. Install light bulb and restore electricity at main breaker. Fluorescent version
bulb is provided with fixture.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)