Hubbardton Forge 306520 - Manual (Page 2)

Installation Instructions
B223
For Wall Sconce 30-6510, 30-6515 & 30-6520 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 26600
5. Apply a generous bead of a suitable caulking material to calking lip (I) on the fixture (not provided).
6. Carefully tuck all wires behind the fixture assembly and inside the wall mount bracket and place the fixture firmly
onto bracket (B) and fasten with #8 black screw (E) and rubber washer (F) on top.
7. Install 2 nd black screw (E) in bottom of fixture attaching to wall mounting bracket (B).
To Install Glass (Figure 2)
Component Parts
A Fixture Assembly
J Glass
K Retaining
Ring
L Socket
M Socket
Tool
N Bulb (Included)
1. Remove retaining ring (K) from socket (L).
2. Slip glass (J) over socket (L).
3. Thread retaining ring (K) onto socket using socket
tool provided (M) until it rest on inside of glass (J).
Do not over tighten.
4. Install bulb (N). Be careful not to touch bulb with
bare hands; oil from the hands will dramatically
reduce bulb life.
5. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)