Hubbardton Forge 304935 - Manual (Page 2)

Installation Instructions
B213
For Rook Outdoor Sconce 30-4935 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24790
To Install Glass (Figures 3 & 4)
Component Parts
C Fixture
F Glass
G Socket
H Thumb
Screw
I Wireway Tube
1. Install light bulb (not included).
2. Slide glass (F) into fixture (C) aligning the slot in the glass towards the back of the fixture (C). Slide glass into
fixture until it rests on the wireway tube (I).
3. Tighten thumb screw (H) until snug. Be careful not to over tighten.
4. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3) (Figure 4)