Hubbardton Forge 304905 - Manual (Page 2)

Installation Instructions
B209
For Twilight Outdoor Sconce 30-4903, 30-4903F, 30-4905 & 30-4905F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24580
To Install Glass (Figures 3 & 4)
Component Parts
C Fixture
F Top
Cover
G Glass
1. Install light bulb. “F” version bulbs are included.
2. Slide glass (G) into fixture (C) aligning the slot in the glass
with the area of the fixture (C) noted in figure 3 and shown in
figure 4. Slide glass into fixture until it rests on the lip inside
the fixture. It may be necessary to push glass towards the
front of the fixture to prevent the glass from rocking or not
sitting straight.
3. Install top cover (F). If light in the up direction is preferred do
not install top cover.
4. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)
(Figure 4)