Hubbardton Forge 304220 - Manual (Page 2)

Assembly & Installation Instructions
B115
For Direct Wire Wall-Mounted Sconces 30-4210, 30-4215 & 30-4220 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 19798 Rev A
To Install Glass (Figure 3)
Component Parts
E Fixture
G Thumb Screw
H Glass Ring
I
Glass
1. Remove glass ring (H) from fixture (E) by removing thumb screw
(G). Glass rings are shipped installed.
2. Install light bulb (not provided).
3. Slip glass ring (H) over glass (I). Install glass (I) aligning glass ring
(H) hole with threaded hole in fixture (E). (Figure 3)
4. Install thumb screw (G) to attach glass ring (F) to fixture (C).
5. Restore electricity at the main breaker.
(Figure 3)
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.