Hubbardton Forge 126703 - Manual (Page 2)

Assembly & Installation Instructions
A185
For Semi-Flush Fixtures 12-6703 & 12-6703F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 22125
To Install Water Glass (Figure 3 & 4)
Component Parts
F Retaining Ring
G Glass
H Socket
I
Decorative Ring Cover
1. Remove retaining ring (F) from socket (H). Retaining Rings are shipped
installed.
2. Install retaining ring (F) into decorative ring cover (I). If retaining ring (F) fits to
loose bend a few inside tabs of the decorative ring cover (I). (See Figure 4)
3. Place glass (G) over socket (H).
4. Replace retaining ring (F) and tighten to secure glass. Do not over-tighten.
5. Install light bulb. (Fluorescent bulbs included with fixture)
6. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)
(Figure 4)